+44 (0) 1422 377904
enquiries@cengar.com
Air Saws for Metal Work
| Air Consumption | 4.0 Cfm (0.116 m3/min) |
| Weight | 2.4 Kgs |
| Strokes Per Minute | 2000 |
| Vibration Level | Trigger: 1.9m/s 2 Front: 1.1m/s 2 |
Cuts metal pipe, Sections, Bolts, Conduit, Cable and GRP.
A low vibration, fast cutting air saw. Ideal for cutting heavy section G.R.P. and Metal up to 50mm (2″) thick.
Used for many applications including Oil & Petrochemical, Pallet Repair, Boatbuilding, Ship Building and Repair, Vehicle Repair & Adaptations and Aircraft Maintenance.
PL905 – with outside rear trigger
PL905FT – with inside front trigger
Supplied in a carry case complete with sample blades and a 250ml bottle of oil.
Use freehand with our MC Red Blades – 220mm long 18 or 24 tpi.
ATEX Approved CE EX II 2G Ex h IIC T2 Gb, ideal for applications requiring pneumatic power for safety.
Cold cutting – No need for Hot Work Permit.
CL50 & CL75
| Air Consumption | 5.75 Cfm (0.168 m3/min) |
| Weight | 2.5 Kgs |
| Noise Level | 82.9 dB(A) |
| Vibration Level | Trigger 3.2m/s. Front 1.7m/s |
| Strokes Per Minute | 1200 |
Used for demanding applications, Cutting Metal & Glass Fibre Plastic.
The CL50 & CL75 air saws can be used handheld or clamp mounted for cutting heavier sections and Pipe up to 150mm (6″) dia.
Used for many applications in Oil & Petrochemical, Fabrication, Ship Building and Repair, Boatbuilding, Aircraft Maintenance and by Fire and Rescue Services.
CL50 & CL75 – has an outside rear trigger
CL50FT & CL75FT – has an inside front trigger
Supplied in a carry case complete with sample blades and a 250ml bottle of oil.
The CL50 Air Saw uses any 12mm (1/2″) wide Bi-Metal hand or machine blades.
The CL75 Air Saw uses Cengar MB Blue Blades 150 to 300mm long in 10/14, 18 or 24 tpi.
ATEX Approved CL50 – CE EX II 2G Ex h IIC T2 Gb & CL75 – CE EX II 2G Ex h IIC T3 Gb, ideal for applications requiring pneumatic power for safety.
Cold cutting – No need for Hot Work Permit.
CS75 Saw
| Air Consumption | 5.75 Cfm (0.168 m3/min) |
| Weight | 2.6Kgs |
| Noise Level | 82.9 dB(A) |
| Vibration Level | Trigger 3.2m/s. Front 1.7m/s |
| Strokes Per Minute | 1200 |
Cuts all types of Steel Sections and pipe up to 150mm (6″) dia.
A more powerful version of the CL75 air saw. Ideal for cutting a wide range of materials including hard steels like Stainless.
Use freehand or with optional Clamp with Blade Guide for straight cuts.
Supplied in a carry case complete with clamp, sample blades and a 250ml bottle of oil.
Use Cengar MB Blue Blades 150 to 300mm long in 10/14, 18 or 24 tpi.
ATEX Approved CE EX II 2G Ex h IIC T3 Gb, ideal for applications requiring pneumatic power for safety.
Cold cutting – No need for Hot Work Permit.
JSZ Saw Supplied Complete With Clamp
| Cutting Capacities | Steel Sections and Pipe up to 300mm dia |
| Air Consumption | 5.75 Cfm (0.168 m3/min) |
| Weight | 4.4 Kgs |
| Strokes Per Minute | 400/600 |
| Noise Level | 80.5 dB(A) |
| Vibration Level | under 2.5 m/s 2 not hand held |
Cuts Steel Sections and Pipe up to 300mm (12″) dia
The JSZ air saw is used in the Oil & Petrochemical and Pipe Fabrication Industries for cutting steel sections and pipe up to 300mm (12″) diameter.
This Air Saw comes complete with a pipe & profile clamp, and a blade guide to ensure straight cuts. Using it in a mounted position means there is no hand arm vibration problem.
Supplied in a carry case complete with clamp, sample blades and a 250ml bottle of oil.
Use Cengar Grey Blades MJ300 or MJ450mm long in 6, 8, 10/14 or 14 tpi.
ATEX Approved CE EX II 2G Ex h IIC T3 Gb, ideal for applications requiring pneumatic power for safety.
Cold cutting – No need for Hot Work Permit.