Cengar air saws are trusted by ship owners and marine maintenance crews worldwide. All models carry IMPA codes for easy procurement and are ATEX certified for safe use in marine environments. From cutting pipe and steel sections to GRP and instrument panel shapes, Cengar has the right saw for every shipboard application. Browse our recommended models below.

PL905 & PL905FT Air Saw

  • Speed 2,000 strokes per minute
  • Suitable for cutting metal pipe, sections, bolts, conduit, cable and GRP up to 50mm thick
  • Use freehand.
  • Use Cengar hand hacksaw blades, 300mm long, 14, 18, 24 and 32 tpi.
  • Use Cengar Red MC blades, 220mm long, 10, 14, 18 and 24 tpi.
  • Use Cengar Silver MCSS blades, 220mm long and 18 tpi.
  • Inside or outside trigger

IMPA Code. 59 05 88

JP901 Air Saw

  • Speed 10,000 strokes per minute
  • Suitable for cutting out circles and other shapes e.g. in instrument panels and dashboards
  • Use freehand.
  • Use Cengar hand hacksaw blades, 300mm long, 14, 18, 24 and 32 tpi.
  • Use Cengar Red MC blades, 220mm long, 10, 14, 18 and 24 tpi.
  • Use Cengar Silver MCSS blades, 220mm long and 18 tpi.
  • Use Cengar MY, notched or tapered blades, 150mm long, 14, 18, 24 and 32 tpi

IMPA Code. 59 05 89

CL75 Air Saw

  • Speed 1,200 strokes per minute
  • Suitable for cutting steel sections and pipe up to 150mm diameter.
  • Use freehand or fitted to a clamp
  • Use Cengar Blue MB blades 220mm long, 10/14, 14, 18 and 24 tpi
  • Inside or outside trigger.

IMPA code. 59 05 80

JSZ Air Saw

  • Two speed – 400 and 600 strokes per minute.
  • Suitable for cutting 150mm to 300mm diameter steel pipes.
  • Mounted on a clamp with a blade guide which ensures straight cuts.
  • Use Cengar Grey MJ blades, 300mm and 450mm long, 6, 8, 10, 10/14 and 14 tpi.

IMPA Code. 59 05 90