Saws

The special piston design feature means that the saws use a low volume of air while maintaining a high cutting speed under load.

		CL50	CL75	CS75	JP901	PL905	JSZ
Speed – strokes per minute		1200	1200	1200	10,000	2,000	400 & 600
Stroke	mm in	45 1¾	45 1¾	45 1¾	9 ⅜	22 ⅞	57 2¼
Standard nosepiece	mm in	12 ½	19 ¾	19 ¾	12 ½	12 ½	25 1
Air consumption	m3/min cfm	0.168 5¾	0.168 5¾	0.168 5¾	0.116 4	0.116 4	0.168 5¾
Weight	kgs lbs	2.50 5½	2.50 5½	2.50 5½	1.60 3½	2.40 5/¼	6.85 15
Length	mm in	400 15¾	400 15¾	400 15¾	270 10¾	300 11¾
Height	mm in	134 5¼	134 5¼	134 5¼	70 2¾	135 5¼	141 5½
Width	mm in	40.6 1⅝	40.6 1⅝	40.6 1⅝	40 1⅝	40.6 1⅝	54 2⅛
Air Pressure	Bar p.s.i.	5 – 6 75 – 90	5 – 6 75 – 90	5 – 6 75 – 90	5 75	5 – 6 75 – 90	5 – 6 75 – 90
Sound pressure level	dB (A)	82.9	82.9	82.9	68.6	68.7	80.5
Sound power level	dB (A)	92.4	92.4	92.4	78.0	69.8	89.9
Vibration Level	m/s²	3.2	3.2	2.4	6.5	1.9	N/A

Please note: The vibration levels shown above will reduce when the saw is used with a clamp.

If you have a cutting problem, send us the details and a sample of your material and we will, free of charge, carry out tests to determine the right saw and blade to do the job. We can make special versions of our saws, even in small quantities, to meet your requirements. The vibration levels shown above are provided for guidance. They increase or reduce depending on circumstances, especially if used with Clamps with exposure levels will reduce.

No level is shown for the JSZ because it is not a hand held machine. We make special versions of our Saws to meet unusual requirements. For more information or a demonstration please contact us or one of our approved distributors.