English
Français
Deutsch
Italiano
Português
Русский
Español
PL905 & PL905FT
Technical Specification
| Air Consumption | 4.0 Cfm (0.116 m3/min) |
| Weight | 2.4 Kgs |
| Strokes Per Minute | 2000 |
| Vibration Level | 1.9m/s 2 |
Videos
Cuts pipe up to 100mm (4″) dia. Sections, Bolts, Conduit,Cable and GRP
A low vibration , fast cutting hand held saw. Ideal for cutting heavy section G.R.P. and Metal up to 50mm (2″) thick.
Used for many applications including Oil & Petrochemical, Pallet Repair, Boatbuilding, Ship Building and Repair, Vehicle Repair & Adaptations and Aircraft Maintenance.
PL905 – with outside rear trigger
PL905FT – with inside front trigger
Supplied in a carry case complete with sample blades and a 250ml bottle of oil.
Use freehand with our MC Red Blades – 220mm long 18 or 24 tpi.
ATEX Approved CE EX II 2G Ex h IIC T2 Gb, ideal for applications requiring pneumatic power for safety.
Cold cutting – No need for Hot Work Permit.
CL75
Technical Specification
| Air Consumption | 5.75 Cfm (0.168 m3/min) |
| Weight | 2.5 Kgs |
| Noise Level | 82.9 dB(A) |
| Vibration Level | 3.2m/s2 |
| Strokes Per Minute | 1200 |
Videos
Cuts all types of Steel Sections and pipe up to 150mm (6″) dia.
The CL75 can be used handheld or clamp mounted for cutting heavier sections and Pipe up to 150mm (6″) dia.
Supplied in a carry case complete with sample blades and a 250ml bottle of oil.
Use Cengar MB Blue Blades 150 to 300mm long in 10/14, 18 or 24 tpi.
ATEX Approved CE EX II 2G Ex h IIC T3 Gb, ideal for applications requiring pneumatic power for safety.
Cold cutting – No need for Hot Work Permit.
CS75 Saw With Clamp
Technical Specification
| Air Consumption | 5.75 Cfm (0.168 m3/min) |
| Weight | 2.6Kgs |
| Noise Level | 82.9 dB(A) |
| Vibration Level | Trigger 3.2m/s. Front 1.7m/s |
| Strokes Per Minute | 1200 |
Videos
Cuts Pipe up to 150mm (6″) dia and all types of Steel Sections.
A more powerful version of the CL75 ideal for cutting a wide range of materials including hard steels like Stainless.
Use fitted to a Clamp with Blade Guide for straight cuts, can also be used freehand.
Supplied in a carry case complete with clamp, sample blades and a 250ml bottle of oil.
Use Cengar MB Blue Blades 150 to 300mm long in 10/14, 18 or 24 tpi.
ATEX Approved CE EX II 2G Ex h IIC T3 Gb, ideal for applications requiring pneumatic power for safety.
Cold cutting – No need for Hot Work Permit.
JSZ Saw With Clamp
Technical Specification
| Cutting Capacities | Steel Sections and Pipe up to 300mm dia |
| Air Consumption | 5.75 Cfm (0.168 m3/min) |
| Weight | 4.4 Kgs |
| Strokes Per Minute | 400/600 |
| Noise Level | 80.5 dB(A) |
| Vibration Level | under 2.5 m/s 2 not hand held |
Videos
Cuts Steel Sections and Pipe up to 300mm (12″) dia.
The JSZ is used in the Oil & Petrochemical and Pipe Fabrication Industries for cutting steel sections and pipe up to 300mm (12″) diameter.
The Saw comes complete with a pipe & profile clamp, and a blade guide to ensure straight cuts. Using it in a mounted position means there is no hand arm vibration problem.
Supplied in a carry case complete with clamp, sample blades and a 250ml bottle of oil.
Use Cengar Grey Blades 300 or 450mm long in 6, 8, 10/14 or 14 tpi.
ATEX Approved CE EX II 2G Ex h IIC T3 Gb, ideal for applications requiring pneumatic power for safety.
Cold cutting – No need for Hot Work Permit.
