Choose a Language:

Oil, Gas & Petrochemical

CengarOil, Gas & Petrochemical

PL905 & PL905FT

Technical Specification

Air Consumption 4.0 Cfm (0.116 m3/min)
Weight 2.4 Kgs
Strokes Per Minute 2000
Vibration Level Trigger: 1.9m/s 2
Front 1.1m/s 2

View the full technical specification

Videos


Cuts pipe up to 100mm dia. Sections, Bolts, Conduit,Cable and GRP
A low vibration, fast cutting handheld saw.
Ideal for cutting heavy section G.R.P. and Metal up to 50mm thick.

Used for many applications including Oil & Petrochemical, Pallet Repair, Boatbuilding, Ship Building and Repair, Vehicle Repair & Adaptations and Aircraft Maintenance.

PL905 – with outside rear trigger
PL905FT – with inside front trigger

Supplied in a carry case complete with sample blades and a 250ml bottle of oil.

Use freehand with our MC Red Blades – 220mm long 18 or 24 tpi.

Download the Brochure (PDF)

ATEX Approved CE EX II 2G T5, ideal for applications requiring pneumatic power for safety.

Cold cutting – No need for Hot Work Permit.

CL75

Technical Specification

Air Consumption 5.75 Cfm (0.168 m3/min)
Weight 2.5 Kgs
Noise Level 82.9 dB(A)
Vibration Level Trigger 3.2m/s. Front 1.7m/s
Strokes Per Minute 1200

View the full technical specification

Videos

Cuts all types of Steel Sections and pipe up to 150mm dia.

The CL75 can be used handheld or clamp mounted for cutting heavier sections and Pipe up to 150mm dia.

CL75  –  with outside rear trigger (can be used with clamp)
CL75FT –  with inside front trigger

Supplied in a carry case complete with sample blades and a 250ml bottle of oil.

Use Cengar MB Blue Blades 150 to 300mm long in 10/14, 18 or 24 tpi.

Download the Brochure (PDF)

ATEX Approved CE EX II 2G T5, ideal for applications requiring pneumatic power for safety.

Cold cutting – No need for Hot Work Permit.

CS75 Saw Supplied With Clamp

Technical Specification

Air Consumption 5.75 Cfm (0.168 m3/min)
Weight 2.6Kgs
Noise Level 82.9 dB(A)
Vibration Level Trigger 3.2m/s. Front 1.7m/s
Strokes Per Minute 1200

View the full technical specification

Videos

Cuts Pipe up to 150mm dia and all types of Steel Sections.
A more powerful version of the CL75. Ideal for cutting a wide range of materials including hard steels like Stainless. 

Use fitted to a Clamp with Blade Guide for straight cuts, can also be used freehand.

Supplied in a carry case complete with clamp, sample blades and a 250ml bottle of oil.

Use Cengar MB Blue Blades 150 to 300mm long in 10/14, 18 or 24 tpi.

ATEX Approved  CE EX II 2G T5, ideal for applications requiring pneumatic power for safety.

Cold cutting – No need for Hot Work Permit.

JSZ Saw Supplied Complete With Clamp

Technical Specification

Cutting Capacities Steel Sections and Pipe up to 300mm dia
Air Consumption 5.75 Cfm (0.168 m3/min)
Weight 4.4 Kgs
Strokes Per Minute 400/600
Noise Level 80.5 dB(A)
Vibration Level under 2.5 m/s 2 not hand held

View the full technical specification

Videos

Cuts Steel Sections and Pipe up to 300mm dia.
The JSZ is used in the Oil & Petrochemical and Pipe Fabrication Industries for cutting steel sections and pipe up to 300mm (12″) diameter.

The Saw comes complete with a pipe & profile clamp, and a blade guide to ensure straight cuts. Using it in a mounted position means there is no hand arm vibration problem.

Supplied in a carry case complete with clamp, sample blades and a 250ml bottle of oil.

Use Cengar Grey Blades MJ300 or MJ450mm long in 6, 8, 10/14 or 14 tpi.

Download the Brochure (PDF)

ATEX Approved CE EX II 2G T5, ideal for applications requiring pneumatic power for safety.

Cold cutting – No need for Hot Work Permit.