Choose a Language:

Metal Work

CengarMetal Work

PL905 & PL905FT

Technical Specification

Air Consumption 4.0 Cfm (0.116 m3/min)
Weight 2.4 Kgs
Strokes Per Minute 2000
Vibration Level Trigger: 1.9m/s 2
Front 1.1m/s 2

View the full technical specification

Videos

Cuts metal pipe, Sections, Bolts, Conduit, Cable and GRP.

A low vibration, fast cutting saw. Ideal for cutting heavy section G.R.P. and Metal up to 50mm thick.

Used for many applications including Oil & Petrochemical, Pallet Repair, Boatbuilding, Ship Building and Repair, Vehicle Repair & Adaptations and Aircraft Maintenance.

PL905 – with outside rear trigger
PL905FT – with inside front trigger

Supplied in a carry case complete with sample blades and a 250ml bottle of oil.

Use freehand with our MC Red Blades – 220mm long 18 or 24 tpi.

Download the Brochure (PDF)

ATEX Approved CE EX II 2G T5, ideal for applications requiring pneumatic power for safety.

Cold cutting – No need for Hot Work Permit.

CL50 & CL75

Technical Specification

Air Consumption 5.75 Cfm (0.168 m3/min)
Weight 2.5 Kgs
Noise Level 82.9 dB(A)
Vibration Level Trigger 3.2m/s. Front 1.7m/s
Strokes Per Minute 1200

View the full technical specification

Videos

Used for demanding applications, Cutting Metal & Glass Fibre Plastic.

The CL50 & CL75 can be used handheld or clamp mounted for cutting heavier sections and Pipe up to 150mm dia.

Used for many applications in Oil & Petrochemical, Fabrication, Ship Building and Repair, Boatbuilding, Aircraft Maintenance and by Fire and Rescue Services.

CL50 & CL75 – has an outside rear trigger
CL50FT & CL75FT – has an inside front trigger

Supplied in a carry case complete with sample blades and a 250ml bottle of oil.

The CL50 Saw uses any 12mm (1/2″) wide Bi-Metal hand or machine blades.

The CL75 uses Cengar MB Blue Blades 150 to 300mm long in 10/14, 18 or 24 tpi.

Download the Brochure (PDF)

ATEX Approved CE EX II 2G T5, ideal for applications requiring pneumatic power for safety.

Cold cutting – No need for Hot Work Permit.

CS75 Supplied With Clamp

Technical Specification

Air Consumption 5.75 Cfm (0.168 m3/min)
Weight 2.6 Kgs
Noise Level 82.9 dB(A)
Vibration Level Trigger 3.2m/s. Front 1.7m/s
Strokes Per Minute 1200

View the full technical specification

Videos

Cuts all types of Steel Sections and pipe up to 150mm dia.

Use handheld or clamp mounted.

A more powerful version of the CL75. Ideal for cutting a wide range of materials including hard steels like Stainless.

Use fitted to a Clamp with Blade Guide for straight cuts, can also be used freehand.

Supplied in a carry case complete with clamp, sample blades and a 250ml bottle of oil.

Use Cengar MB Blue Blades 150 to 300mm long in 10/14, 18 or 24 tpi.

ATEX Approved CE EX II 2G T5, ideal for applications requiring pneumatic power for safety.

Cold cutting – No need for Hot Work Permit.

JSZ Saw Supplied Complete With Clamp

Technical Specification

Cutting Capacities Steel Sections and Pipe up to 300mm dia
Air Consumption 5.75 Cfm (0.168 m3/min)
Weight 4.4 Kgs
Strokes Per Minute 400/600
Noise Level 80.5 dB(A)
Vibration Level under 2.5 m/s 2 not hand held

View the full technical specification

Videos

Cuts Steel Sections and Pipe up to 300mm dia

The JSZ is used in the Oil & Petrochemical and Pipe Fabrication Industries for cutting steel sections and pipe up to 300mm (12″) diameter.

The Saw comes complete with a pipe & profile clamp, and a blade guide to ensure straight cuts. Using it in a mounted position means there is no hand arm vibration problem.

Supplied in a carry case complete with clamp, sample blades and a 250ml bottle of oil.

Use Cengar Grey Blades MJ300 or MJ450mm long in 6, 8, 10/14 or 14 tpi.

Download the Brochure (PDF)

ATEX Approved CE EX II 2G T5, ideal for applications requiring pneumatic power for safety.

Cold cutting – No need for Hot Work Permit.